Kyocera ECOSYS MA3500cifx - Wired Network Settings

System Menu > NetworkSettings
479
Wired Network Settings
[System Menu / Counter] key > [NetworkSettings] > "Network Settings" [Wired Network Settings]
Configure wired network settings.
TCP/IP SettingsTCP/IP Settings
TCP/IP
Select whether to use TCP/IP Protocol.
Value: Off, On
[IPv4 Settings]
Set up TCP/IP (IPv4) to connect to the network.
This setting is available when TCP/IP is On.
Item Description
DHCP Select whether to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP Select whether to use Auto-IP.
Value: Off, On
IP Address Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Subnet Mask Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Default Gateway Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.