Preparation before Use > Preparation for Sending a Document to a Shared Folder in a PC
163
Scan to Folder Setup Tool for SMB
An environment for sending a document to Windows can be set up smoothly by using the Scan to Folder Setup
Tool for SMB downloaded from Download Center (https://kyocera.info/).
By operating the Scan to Folder Setup Tool for SMB, you can configure the following settings.
• Create a shared folder in a PC for receiving documents:
A new folder can be easily created on the desktop. Also, the newly created folder is automatically set as a shared
folder.
• Set the created shared folder as an address on this machine:
Information about such things as the name of the computer and shared names for the shared folder is easily
recorded in the address book of this machine with a sequence of actions. Can also be registered on the One
Touch Keys.
NOTE
• Log on to Windows with administrator privileges.
• If user login administration is enabled, log in with administrator privileges or as a user with execution
authority.
1
Download a software from the website.
1 Launch your Web browser.
2 Enter "https://kyocera.info/" to the browser's address bar or location bar.
3 Enter and search the product name, and select this product from the candidate list.
To Next Page
Loading...
