Installing and Setting up the Machine > Command Center RX
116
Accessing Command Center RX
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[DeviceInformation] in the home screen > [Identification/Wired Network]
Example: https://10.180.81.1 (in the case of /IP address)
https://MFP001 (if the host name is MFP001)
The web page displays basic information about the machine and Command Center RX as well as their
current status.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed, configure the
certificate.
➡ Command Center RX User Guide
You can also continue the operation without configuring the certificate.
2
Configure the settings.
Select a category from the navigation bar on the left of the screen.
To Next Page
Loading...
