Preparation before Use > Load Paper
144
Paper Specifications available in the Multipurpose Tray
Up to 100 sheets of normal paper (64 g/m
2
) can be added to the multipurpose tray.
For details of the supported paper sizes, refer to the following:
➡ Choosing the Appropriate Paper (page 746)
For the paper type setting, refer to the following:
➡ [Media Type Setting] (page 429)
Be sure to use the multipurpose tray when you print on any special paper.
IMPORTANT
• If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick and set the weight of the paper
you are using.
The capacity of the multipurpose tray is as follows.
• Plain paper (64 g/m
2
), recycled paper, and colored paper: 100 sheets
• Thick paper (209 g/m
2
): 15 sheets
• Thick paper (157 g/m
2
): 30 sheets
• Thick paper (104.7 g/m
2
): 50 sheets
• Hagaki (Cardstock): 30 sheets
• Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2:
5 sheets
• Coated: 30 sheets
NOTE
• When you load custom size paper, enter the paper size by referring to the following:
➡ [MP Tray Settings] (page 426)
To Next Page
Loading...
