System Menu > FunctionSettings
446
[Copy/Print]
[System Menu / Counter] key > [FunctionSettings] > [Function Defaults] > [Copy/Print]
Item Description
[Original Size] Set the default value for the original size. When Standard Size Detection
is OFF, the size set in the default original size is displayed as an option.
These settings are in [Original/Scan Settings].
Standard Size Detection: On
Value: [Auto (Standard Size)], [Auto (Non-standard Size)]
Standard Size Detection: Off
Value: [Auto (Non-standard Size)], Original Size (default size)
[Original Orientation (Copy)] Set the original orientation defaults.
Value: [Top Edge on Top], [Top Edge on Left], [Auto]
*1
[Color Selection (Copy)] Set the default copying color mode setting.
Value: [Auto Color], [Full Color], [Black & White]
[Color Balance] Sets the default color balance value.
Value: Cyan (-5 to 5), Magenta (-5 to 5), Yellow (-5 to 5), Black (-5 to 5)
[Original Image (Copy)] Set the default original document type for copying.
Value: [Text+Photo], [Photo], [Text], [Graphic/Map], [Printer Output]
[Background Density Adj. (Copy)] Set the default Background Density (Copy).
Value: [Off], [Auto], [Manual (Darker 5)]
[Continuous Scan (Copy)] Select the default Continuous Scan (Copy) setting.
Value: Off, On
[Prevent Bleed-through (Copy)] Set the default value for preventing bleed-through (Copy).
Value: Off, On
[Skip Blank Page (Copy)] Set the default Skip Blank Page status.
Value: Off, On
[EcoPrint] Select the EcoPrint default.
Value: Off, On
[Border Erase (Copy)] Set the defaults for Border Erase (Copy).
Value
[Standard], [Border Erase Sheet], [Border Erase Book], [Individual
Border Erase]
[Collate] Set the defaults for Collate.
Value
Off, On
[JPEG/TIFF Print] Select the image size (resolution) when printing JPEG or TIFF file.
Value: [Fit to Paper Size], [Image Resolution], [Fit to Print Resolution]
[XPS Fit to Page] Set the default value for the XPS fit to page function.
Value: Off, On