Troubleshooting > Troubleshooting
627
White background parts of the image appear to have a slight
overall coloration
Have you changed the density?
Select appropriate density level.
1
Set the density in the range [-4] to [4]
➡ Density (page 327)
NOTE
Density can also be set from [System Menu / Counter] key > [Adjustment/Maintenance] > "Image
Adjustment" > [Image Adjustment].
➡ Density Adjustment (page 508)
Calibration needs to be performed.
1
Display the screen.
1 [System Menu / Counter] key > [Adjustment/Maintenance] > "Image Adjustment" [Image Adjustment]
2
Perform the calibration.
1 Perform the calibration.
Calibration begins.
Developer refresh needs to be performed.
1
Display the screen.
1 [System Menu / Counter] key > [Adjustment/Maintenance] > "Image Adjustment" [Image Adjustment]
2
Perform the Developer Refresh
1 Perform the Developer Refresh.
Developer Refresh begins.
NOTE
Waiting time may be longer when the toner is refilled during developer refresh.
To Next Page
Loading...
