Kyocera ECOSYS MA3500cifx User Manual

Appendix > About Paper
752
Keep the following points in mind.
• Do not use envelopes with exposed adhesive. In addition, do not use the type of envelope in which the adhesive
is exposed after the top layer is peeled off. Serious damage may be caused if the paper covering the adhesive
comes off in the machine.
• Do not use envelopes with certain special features. For example, do not use envelopes with a grommet for
winding a string to close the flap or envelopes with an open or film-covered window.
• If paper jams occur, load fewer envelopes at once.
Thick Paper
Before loading thick paper, fan it and align the edges. Some thick paper may still have rough edges developed by
a paper cutter on the back side. Remove any such rough edges just as with Hagaki (Cardstock) by placing the
paper on a flat surface and rubbing the edges gently a few times with a ruler. Printing onto paper with rough
edges may cause jams.
NOTE
If the paper is not supplied correctly even after it is smoothed, load the paper with the leading edge raised a few
millimeters.
Colored Paper
Colored paper must conform to the specifications.
➡ Basic Paper Specifications (page 745)
In addition, the pigments in the paper must be able to withstand the heat of printing (up to 200°C or 392°F).
Preprinted Paper
Preprinted paper must conform to the specifications
➡ Basic Paper Specifications (page 745)
The colored ink must be able to withstand the heat of printing. It must be resistant to silicone oil as well. Do not
use paper with a treated surface such as glossy paper used for calendars.
Recycled Paper
Recycled paper must conform to the specifications; however, its whiteness may be considered separately.
➡ Basic Paper Specifications (page 745)
NOTE
Before purchasing recycled paper in volume, try testing a sample to ensure satisfactory print quality.
Coated Paper
Coated paper is created by treating the surface of the base paper with a coating that provides higher printing
quality than plain paper. Coated paper is used for particularly high quality printing.
The surface of high-quality or medium-quality paper is coated with special agents that improve ink adhesion by
making the paper surface smoother. These agents are used either to coat both sides of the paper or just one side.
The coated side appears slightly glossy.

Kyocera ECOSYS MA3500cifx Specifications

General

N-up printing	2, 4
Duplex printing	Yes
Print technology	Laser
Borderless printing	No
Duplex printing mode	Auto
Time to first page (black, normal)	5.7 s
Time to first page (color, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Duplex print speed (black, normal quality, A4/US Letter)	17.5 ppm
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Printing colors	Black, Cyan, Magenta, Yellow
Duplex functions	Copy, Fax, Print, Scan
Country of origin	Vietnam
Maximum duty cycle	100000 pages per month
Recommended duty cycle	1000 - 3500 pages per month
Replacement cartridges	TK-5370
Number of print cartridges	4
Page description languages	PCL 5c, PCL 6, PCL XL, PCLm, PDF, PostScript 3, XPS
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	6.1 s
Time to first copy (color, normal)	7.2 s
Copy speed (black, normal quality, A4)	35 cpm
Memory slots	1
Processor cores	2
Processor family	ARM Cortex-A9
Maximum internal memory	3000 MB
Sound pressure level (standby)	30 dB
Sound pressure level (printing)	51 dB
Optional connectivity	Ethernet, Wireless LAN
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Cabling technology	10/100/1000Base-T(X)
Security algorithms	SNMPv3, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Mopria Print Service
Package depth	728 mm
Package width	623 mm
Package height	789 mm
Package weight	51000 g
AC input voltage	220 - 240 V
AC input frequency	50/60 Hz
Power consumption (off)	0.1 W
Power consumption (sleep)	0.5 W
Power consumption (copying)	479.1 W
Power consumption (standby)	18.8 W
Power consumption (printing)	449.1 W
Energy Star Typical Electricity Consumption (TEC)	0.34 kWh/week
Total input capacity	350 sheets
Total output capacity	250 sheets
Maximum input capacity	2000 sheets
Maximum number of input trays	5
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Labels, Letterhead, Plain paper, Pre-Printed
Non-ISO print media sizes	Folio (media size), Legal (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-Purpose Tray media weight	60 - 220 g/m²
Scan to	E-mail, FTP, SMB, USB
Scanner type	Flatbed & ADF scanner
Scan speed (black)	60 ppm
Scan speed (color)	50 ppm
Image formats supported	JPG, TIF
Duplex scan speed (black)	120 ppm
Duplex scan speed (color)	100 ppm
Document formats supported	PDF, XPS
Faxing	Mono faxing
Fax memory	256 pages
Modem speed	33.6 Kbit/s
Fax resolution (black)	400 x 400 DPI
Fax transmission speed	2.5 sec/page
Mac operating systems supported	Mac OS X 10.9 Mavericks, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Operating altitude	0 - 3500 m
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32.5 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	Blue Angel, CE, ENERGY STAR, EPEAT Gold, REACH, RoHS, TUV, WEEE
Cables included	AC
Included cartridge capacity (CMY)	2500 pages
Included cartridge capacity (black)	3500 pages

Weight and Dimensions

Depth	577.5 mm
Width	480 mm
Height	575 mm