System Menu > Network
203
[Connect-by Other]
[Push Button]
If the access point supports the push button method, wireless settings can be configured using the push button.
This setting executes push button, and the connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
[PIN (Device)]
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The PIN code of the
machine is automatically generated.
[Custom Setup]
The detailed settings for wireless LAN can be changed.
Item Description
[Netwk Name(SSID)] Set the SSID (Service Set Identifier) of the wireless LAN to which the
machine connects.
NOTE
Up to 32 characters can be entered.
[Netwk Authentic.] Select network authentication type.
Value: [Open], [WPA2/WPA-PSK], [WPA2-PSK], [WPA2/WPA-EAP],
[WPA2-EAP], [WPA3SAE/WPA2PSK], [WPA3-SAE], [WPA3/WPA2-EAP],
[WPA3-EAP]
To Next Page
Loading...
