Status/Job Cancel > Checking Job Status
172
Checking Job Status
Check the status of jobs being processed or waiting to be printed.
Displaying Status Screens
1
Display the screen.
Select [Status] while the printer is waiting or printing.
[ ][ ] key > [Job Status] > [OK] key
2
Select the job you want to check.
Select the job to check, and select [OK] key or [Detail].
NOTE
• You can show the job statuses of all users, or only the statuses of your own jobs.
➡ Disp. Status/Log (page 232)
• This setting can also be changed from Command Center RX. For details, refer to the following:
➡ Command Center RX User Guide
3
Check the information.
[ ]Select key to display the next page. Select the [ ] key to return to the previous screen.
[Job Name]
When the job name cannot be displayed because the job name is too long, selecting [Detail] will display
the entire job name. Selecting the [OK] key will return to the original screen.
[Status]
[Processing.]: The status before starting to print
[Waiting]: Print Waiting
[Pause]: Pausing print job or error
[Canceling]: Canceling the job
[-----]: The job is ending.
[Job Type]
[Printer]: Printer job
[Report]: Printing Report/List
[USB]: Printing data from USB Drive
[Box]: Printing from Document Box
[Accepted Time]
Accepted Time of job
[User Name]
User Name for the executed job
To Next Page
Loading...
