Installing and Setting up the Machine > Login/Logout
42
Login/Logout
Login
1
Enter the login user name and login password to login.
If the login screen is displayed during operations, select a [Login User Name] and press the [OK] key.
1 If the user authentication method is set to [Netwk Authentic.], [Menu] is displayed. Selecting [Menu] then
[Login Type] allows either [Local Authentic.] or [Netwk Authentic.] to be selected as the authentication
destination. Selecting [Menu] then [Domain] allows a registered domain to be selected.
2 Enter the login user name.
NOTE
If you do not know your login User Name, please contact your Administrator.
3 Enter the login password.
➡ Character Entry Method (page 1)
NOTE
If you do not know your login Password, please contact your Administrator.
4 Select [PIN Login] or [ID Card Login] as the login method.
➡ User Authentication and Accounting (User Login, Job Accounting) (page 247)
2
Select [Login].
To Next Page
Loading...
