Installing and Setting up the Machine > Default Settings of the Machine
45
NOTE
Use the [ ] or [ ] key to enter numbers.
When you select the [ ] or [ ] keys, the input position moves to the left or right and is highlighted.
Network Setup
Configuring the Wired Network
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP
(IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Mac, UNIX and other
platforms. The configuration methods are as follows:
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional Network
Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-37/IB-38/IB-51), select the desired setting on [Primary
Network].
➡ Primary Network (page 219)
For other network settings, refer to the following:
➡ Network (page 200)
Configuration Method Description
Configuring the Connection from
the Operation Panel on This
Machine
Use Wired Network Settings or Optional Network to configure the
network in details from System menu.
➡ Wired Netwk. Set (page 208)
➡ Optional Network (page 222)
Configuring Connections on the
Web Page
For the equipped network interface, the connection can be set by using
Command Center RX. For the IB-50, the connection can be set on the
dedicated Web page.
➡ Command Center RX User Guide
➡ IB-50 Operation Guide
Setting the Connection by Using
the Setup Utility of IB-50
This is the setup tool included in the CD of IB-50. You can use it on
Windows.
➡ IB-50 Operation Guide
To Next Page
Loading...
Need help?
General
Weight and Dimensions
