Installing and Setting up the Machine > Command Center RX
80
Changing Security Settings
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
In the home screen [Status] > [ ][ ] key > [Network] > [OK] key[]
3 Log in with administrator privileges.
4 Click [Security Settings].
2
Configure the settings.
From the [Security Settings] menu, select the setting you want to configure.
NOTE
For details on settings related to certificates, refer to the following:
➡ Command Center RX User Guide
To Next Page
Loading...
