User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
263
PIN Login
NOTE
When using PIN Code Authorization, the network authentication must be enabled and [Ext.] must be selected for
server type.
➡ Enable User Login Administration (page 249)
➡ Server Settings (page 257)
1
Display the screen.
1 [Menu] key > [ ] [ ] key > [User/Job Account] > [OK] key > [ ] [ ] key > [User Login Set.] > [OK] key
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 [ ] [ ] key [PIN Login] > [OK] key
2
Configure the function.
1 Select [Off] or [On]
Using User Login Administration
This section explains procedures while setting job accounting.
Login/Logout
If user login administration is enabled, the login user name and login password entry screen appears each time
you use this machine. Use the procedure below to login and logout.
Login
If the login user name entry screen appears during operations, log in by referring to the following:
➡ Login (page 42)
Logout
When the operation is complete, select the [Logout] key. You will return to the login user name/login password
entry screen.
To Next Page
Loading...
