Operating the Storage Device
1-86
9
Repeat above steps until you have transferred all data (files) that
you want to write to the CompactFlash card. Each time you finish
writing data, a CompactFlash card write information page is printed
from the printer showing the information explained in step 4 above,
but pertaining only to the data just written. To see all data contained
in the CompactFlash card at once, print a list of data names as
explained on page 1-89, Printing a List of Data Names.
Deleting Data
You can use the printer’s operator panel to delete data from a
CompactFlash card, the Microdrive or the RAM disk.
1
Press the MENU key.
2
Press the or key repeatedly until Memory Card >, Hard Disk
> or RAM Disk Mode > appears.
3
Press the > key.
4
Press the or key repeatedly until > Delete Data appears. The
data name also appears.
5
Press the ENTER key. A blinking question mark (?) appears before
the data name.
6
Press the or key to display the desired data name.
7
Press the ENTER key. Processing appears and the data is deleted
from the CompactFlash card.
Memory Card >
>Delete Data
data name
>Delete Data
?data name
To Next Page
Loading...
Need help?
General
