Kyocera FS FS-1920 User Manual

RS-232C Protocol
B-9
PRESCRIBE FRPO D0 Command
The PRESCRIBE FRPO D0 command provides control over XON/XOFF
operation when an error occurs on the serial interface. The following table
summarizes the error status corresponding to different D0 values.
Timing of XON transfer to
host while Ready or Waiting
Serial interface error
Error not handled Error handled
XON sent every 3-5 seconds D0=0 (default) D0=1
XON not sent D0=10 D0=11
Table B-8

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual