Kyocera FS FS-1920 User Manual

Operating the Storage Device
1-83
Reading Data
To read data on a CompactFlash card, Microdrive, or the RAM disk use the
following procedure:
1
Press the MENU key.
2
Press the or key repeatedly until Memory Card >, Hard Disk
> or RAM Disk Mode > appears.
3
Press the > key.
4
Press the or key repeatedly until >Read Data appears. The
data name also appears.
5
Press the ENTER key. A blinking question mark (?) appears before
the data name.
6
Press the or key to display the desired data name.
7
Press the ENTER key. Processing appears and the reading of data
from the storage device starts.
Memory Card >
>Read Data
data name
>Read Data
?data name

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual