Kyocera FS FS-1920 User Manual

Configuration
1-96
Total Printed Pages
This procedure displays the total number of printed pages.
1
Press the MENU key.
2
Press the or key repeatedly until Life Counters > appears.
3
Press the > key.
4
Press the or key repeatedly until >Total Print appears, the
total number of printed pages displayed.
5
Press the MENU key. The message display returns to Ready.
Toner Counter Resetting
When the toner container is replaced, reset the toner counter as follows so
that an accurate toner gauge measurement is indicated on the status page.
Note that if this operation is performed when the toner container is not
replaced, the toner gauge measurement will not be indicated correctly.
Also refer to the Installation Guide supplied with the toner kit when
replacing the toner container.
1
Press the MENU key.
2
Press the or key repeatedly until Life Counters > appears.
3
Press the > key.
4
Press the or key repeatedly until >New Toner Installed.
appears
Life Counters >
>Total Print
0012345
Life Counters >
>New Toner
Installed

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual