xiii
For More Information...
• For information on how to install the printer driver software, refer to
the KX Printer Driver Installation Guide that is included with the
printer.
• For information on how to use the printer driver software, refer to the
KX Printer Driver Operation Guide that is included on the CD-ROM
(comes with the printer).
Item Description
Installation Guide
(paper manual)
Describes procedures from printer setup to printing
a test page.
KX Printer Driver
Installation Guide
(paper manual)
Describes the procedure to install the printer driver
software.
Operation Guide
(this manual)
Guides you through topics concerning the
operations and maintenance of the printer.
KX Printer Drivers
Operation Guide
Describes how to install and set the printer driver.
PRESCRIBE Command
Technical Reference
PRESCRIBE is the native language of the Kyocera
Mita printers. This Technical Reference contains
the information about how the printing is
performed using the PRESCRIBE commands as
well as the font and emulation description. Also
included is a list of permanent parameters and
their explanation needed when customizing your
printer.
PRESCRIBE Command
Reference
Gives a detailed explanation of the PRESCRIBE
command syntax and parameters with the aid of
print examples.
Note
To Next Page
Loading...
Need help?
General
