Kyocera FS FS-1920 User Manual

Pagination
1-54
Ecoprint
The Ecoprint enables you to reduce the amount of toner consumed on the
page so as to save your printing costs. You can set to Ecoprint mode on, as
follows. (The factory default setting is Off.)
The Ecoprint setting has no effect on the print speed.
The Ecoprint mode setting is On when the printing image becomes lighter,
yet very readable.
1
Press the MENU key.
2
Press the or key repeatedly until Print Quality > appears.
3
Press the > key.
4
Press the or key repeatedly until >EcoPrint Mode appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Select On or Off using the or key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
Ecoprint setting is Off
(default).
Ecoprint setting is On
Print Quality >
>EcoPrint Mode
Off
>EcoPrint Mode
? Off

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual