Paper Handling
1-32
6
Press the or key to display the desired MP tray type. The display
changes as shown below.
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
Custom (1 to 8)
7
When the desired MP tray type is displayed, press the ENTER key.
8
Press the MENU key and the message display returns to Ready.
Creating Custom Paper Type
The following describes the procedure used to set a user-defined paper type
for the printer. Eight custom user settings may be registered. After having
been set, any of these may be called up when setting the paper type for a
paper source.
The paper weight and duplex path can be set (see Setting the Paper
Weight on page 1-34, and Setting the Duplex Path on page 1-35) after
selecting the paper type to be customized as follows. For how to reset the
customized settings, see Resetting the Custom Paper Type on page 1-36.
1
Press the MENU key.
2
Press the or key repeatedly until Paper Handling > appears.
3
Press the > key.
4
Press the or key repeatedly until >Type Adjust > appears.
Paper Handling >
>Type Adjust >
Custom 1
To Next Page
Loading...
Need help?
General
