Pagination
1-48
Setting the Character Pitch for Courier/Letter Gothic
The character pitch for fixed fonts is adjustable when the default font is
Courier or Letter Gothic.
1
Press the MENU key.
2
Press the or key repeatedly until Font > appears.
3
Press the > key.
4
Press the or key repeatedly until >Font Select > appears.
5
Check that Internal is displayed and press the > key.
6
Press the or key repeatedly until >>Pitch appears.
7
Press the ENTER key. A blinking cursor ( _ ) appears.
8
Press the or key to increase or decrease the value of the figure
where the cursor is blinking. The character pitch can be set between
0.44 and 99.99 characters per inch, in 0.01 character-per-inch
increments. You can use the > or < keys to move the cursor right and
left.
9
When the desired size is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Font >
>Font Select >
Internal
>>Pitch
10.00 cpi
>Pitch
10.00
cpi
To Next Page
Loading...
Need help?
General
