Kyocera FS FS-1920 User Manual

Installing Option Units
A-26
Network Interface Card
Insert the option network interface card into the option interface slot at the
rear of the printer. The network interface card enables the printer to be
used in a network.
1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the two screws from the option interface slot cover.
3
Insert the network interface card and secure it with the screws
removed in step 2.
Option Interface
Slot Cover
Screws
Network Interface
Card
Screws

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual