Kyocera FS FS-1920 User Manual

Expanding the Printer Memory
A-5
2
Remove the two screws from the printer’s rear panel.
3
Pull the main circuit board all the way out of the printer.
Before pulling the main circuit board out, clear away the area, behind the
printer. Foreign objects, accidentally sticking to the back of the main
circuit board, can cause serious damage to the printer.
Install the DIMM as described on the following page.
Screws
DIMM Socket
Note

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual