Kyocera FS FS-1920 User Manual

Expanding the Printer Memory
A-8
Adjusting the Memory on the Printer Driver
After you install the additional memory to the printer, follow the
instructions below to set the printer driver so that the printer can use the
memories efficiently.
1
Click the Windows start button, and click Printers and Faxes.
2
Right click the Kyocera Mita FS-1920 KX icon, and click Properties.
The Properties dialog box will open. Click the Device Settings tab.
3
Enter the total memory size installed to the printer (up to 288 MB)
in the Memory box.
4
Click the OK button to close the window.

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual