Pagination
1-45
6
Press the > key. The message display changes to that show below.
The letter before the number indicates the type of font as shown
below:
7
Press the ENTER key. A blinking question mark (?) appears.
8
Press the or key repeatedly until the desired font number
appears. For font numbers of the internal fonts, see List of Fonts on
page 5-2.
9
When the desired font is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Letter Description
I
Internal font
S
Soft (down load) font
M
Fonts in an option CompactFlash card
H
Fonts in a RAM disk or option Microdrive.
O
Fonts in an option ROM
Table 1-6
>> I000
>>?I000
To Next Page
Loading...
