2.2 Responsibilities
WARNING
⚫ Ensure that all personnel authorized to use the equipment are aware of the dangers
of excessive exposure to x-ray radiation.
⚫ The equipment herein described is sold with the understanding that the manufacturer,
its agents, and representatives are not liable for injury or damage which may result
from overexposure of patients or personnel to x-ray radiation.
⚫ The manufacturer does not accept any responsibility for over exposure of
patients or personnel to x-ray radiation generated by this equipment which is a result
of poor operating techniques or procedures.
⚫ No responsibility will be assumed for any equipment that has not been serviced and
maintained in accordance with the instructions of the manufacturer, or which has
been modified or tampered with in any way.
⚫ It is the responsibility of the operator to ensure the safety of the patient while the x-
ray equipment is in operation by visual observation, proper patient positioning, and
use of devices that are intended to prevent patient injury.
⚫ Always watch all parts of the system to verify that there is neither interference nor
possibility of collision with the patient or with other equipment.
⚫ Make sure that the x-ray tube is set in working position with the reference axis (x-ray
beam) pointing to the reception area.
⚫ Should any interference (EMC) be detected with other equipment, please position
other equipment away from this one.
To Next Page