operator can select “receive “or “reject”. You need do exposure again after selecting “reject”
while the radiography is finished by selecting “receive”.
10. Process the image: If necessary, conduct image processing such as flip, zoom
in/out and so on.
11. Print film: Select print one or multiple images to print.
12. Send images: Click the button “Send” to send the checked studies to PACS or any
other DICOM interface system.
13. Repeat above procedures if you need another exposure.
7.5 System shut down
1. Exit the image station software, close the image station, and allow the computer,
machine frame and detector to turn off automatically.
2. Turn off the printer according to the laser or inkjet printer instructions.
3. Turn off the film printer according to the film printer instruction.
4. Turn off the generator.
5. Cut off the computer cable board power.
6. Cut off the general switch of the distribution cabinet.
To Next Page