Lanmage 6600C - Maintenance Record; Cleaning and Disinfection; Error Code

6600 Product Manual
Operator Manual
77
of the power supply (or the power supply voltage drop) changes, and fulfill the
requirements of the power supply for the power supply.
8.3 Maintenance record
Maintenance record
item
A
B
Maintenance content
Maintenance record
1
√
Clean
2
√
Check the high voltage cable
connection
3
√
Check the high voltage cable shield
4
√
Check the ground connection
5
√
Check the console functions
6
√
Analyzing error code
8.4 Cleaning and disinfection
◼ Users should wipe the surface of the bed panel and rails thoroughly with gauze
and medical alcohol at a weekly frequency.
◼ Users can spray the surface of the device every month, and then wipe it with dry
gauze or towel.
◼ Clean the beam limiter with a soft cloth. Make sure that water or other liquids do
not enter the beam limiter when cleaning. Be careful that the outer casing of the
device is not watertight.
8.5 Error code
In order to ensure the continuous safe operation of the X-ray machine generator, it
should be maintained regularly. There are two aspects to maintenance: routine
maintenance by users or operators, and maintenance by authorized qualified personnel.
NOTE: professional maintenance must be performed by a manufacturer
authorized professional.
Console can control generator by communication with RS232 protocol. A part of faults
of generator can be diagnosed by error code display on Console. The following tables are