ECP5 and ECP5-5G High-Speed I/O Interface
Technical Note
© 2014-2020 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-TN-02035-1.3 57
7.4. Configuring 7:1 LVDS Interface Modules
To build a 7:1 LVDS DDR interface, select GDDR_7:1 option under Architecture Modules – I/O in the Catalog tab of
Clarity Designer. Enter the name of the module.
Figure 7.7 shows the type of interface selected as GDDR_7:1 and module name entered. This module can then be
configured by clicking the Customize button.
Figure 7.7. GDDR_7:1 Option Selected in the Catalog Tab of Clarity Designer
Clicking Customize displays the Configuration tab where the 7:1 LVDS interface can be configured. Figure 7.8 shows the
Configuration tab for 7:1 LVDS interfaces.
Figure 7.8. GDDR_7:1 LVDS Configuration Tab
To Next Page
Loading...
