LeCroy 9400A User Manual

Examples:
READ,CI.DE
READ,MC.DA
READ,MC.DA,,,-7000
READ,CI.DA,5,100,1000
READ,MD.DA,,,,5
READ,CHANNEL 2.*
Instructs the 9400A to transmit the
waveform descriptor of Channel 1 in the
format described in Section 7.7. If the
9400A is armed and waiting for a
trigger, the execution is deferred until
the waveform is acquired.
Instructs the 9400A to transmit all data
values of Memory C which would appear on
the screen, but no descriptor or trigger
time(s).
Instructs the 9400A to transmit all data
points of Memory C, starting -7000
(invisible) points before the left hand
side of the screen, up to the last value
at the right hand side.
Instructs the 9400A to transmit I00 data
values of Channel i, starting i000
values to the right of ~e beginning of
the screen. Only every 5 data value is
transmitted, i.e. 4 out of 5 values are
omitted.
Instructs the 9400A to transmit all data
values of sweep #5 from the SEQNCE data
record in memory D. If memory D is not a
SEONCE record, the last parameter is
ignored, and the command would be
interpreted as READ,MD.DA, resulting in
the transmission of all (visible) data
of the memory D.
Instructs the 9400A to transmit the
waveform descriptor, data and time(s)
Channel 2. This is the most complete
(and safest) way to archive the visible
part of a waveform. The host computer
can restore the complete waveform in
memories C or D with the command WRITE
MC.*, followed by the transmission of
the data records.
7-26
Remote Operations

LeCroy 9400A Specifications

General

Brand	LeCroy
Model	9400A
Category	Test Equipment
Language	English