The 9400A has also been designed for remote control operation in
automated testing and computer aided measurement applications. The
entire measurement process, including dynamic modification of front
panel settings and display organization, can be controlled via the rear
panel RS-232-C and optional GPIB (IEEE-488) ports. GPIB control
enables direct interfacing between the 9400A and a host computer at
data transfer rates of up to 400 kilobytes/sec.
The LeCroy 9400A is capable of storing up to seven front panel setups
which may be recalled either manually or by remote control, thus
ensuring rapid oscilloscope front panel configuration. When the power
is switched on, the 9400A’s front panel settings are the same as when
it was last used.
2-4
Product Description
To Next Page
Loading...
