4-18 LeeBoy 8520C Conveyor Paver
Operation
function is disabled (inhibited). If the DPF level reaches
Level 3 (described on the following page), a warning
message appears notifying the operator that the parked
regeneration procedure MUST be performed as soon
as possible. (Figure 4-35)
Figure 4-35. Level 3 Regen Screen
If the soot level reaches Level 4 (or 5),
specialized equipment is needed to perform regen-
eration and the machine must be serviced by your
authorized dealer. The DPF system may become
damaged and require replacement. Therefore, per-
forming regeneration BEFORE reaching Level 4 is
imperative to preventing costly repair.
NOTE: Regeneration will remain disabled until the
engine is turned off or the operator navigates
back to DPF Commands where “Enable Auto
Regen” now appears in the soft key banner
(button #5) and selects. (Figure 4-34)
Figure 4-34. Enable (Uninhibit) Regen Screen
The soot level will continue to rise while the regen
Press the button to disable automatic
regeneration. The DPF Regen Set to Inhibit
icon appears in the alerts window as a
reminder regen is disabled.
To Next Page
Loading...
