3476
2 1
230V ˜
2A cosϕ = 0,6
2A
L L1
1
2
4
3
44
Description
This device features a compact size and can be used in ush-mounted boxes, junction
boxes, shutter boxes and ducts. Particularly advantageous is the installation inside
junction boxes, positioning the item at the back of the ush-mounted box, behind
lowered automation devices or behind conventional devices (pushbuttons, switches,
etc.). This actuator/control accepts a traditional button with N/O contact on input. The
control/actuation device has a BUS input made with blue cables, an input for connecting
the external pushbutton via the grey and black cables and a relay contact for load control
via the two white cables.
Technical data
Power supply via SCS BUS: 27 Vdc
Operating power supply with SCS BUS: 18 – 27 Vdc
Current draw: 13 mA
Power/Consumption of driven loads:
Front view Side view
Legend
1. Congurator socket
2. LED
3. Cables 0.75 mm
2
for load connection
4. BUS
Incandescent lamps
Halogen lamps
LED lamps
Compact uorescent lamps
Ferromagnetic
transformers
230 Vac 460 W 2 A 40 W Max. 1 lamp 2 A cosφ 0.5 460 VA
Basic Control Actuator
MQ00077-e-EN 07/06/2014
If the device is installed in a My Home system it can be configured in two ways:
- PHYSICAL CONFIGURATION, inserting the configurators in position.
-
Configuration via MYHOME_Suite software package, downloadable from
www.homesystems-legrandgroup.com; this mode has the advantage of offering many
more options than the physical configuration.
For a list of the procedures and their meanings, please refer to the instructions on this
sheet and to the "Glossary" section of the Guide to designing and installing My Home.
Configuration
1.1 Addressing
Address type Virtual configuration (MYHOME_Suite) Physical configuration
Point-to-point Room 0-10 A=1-9
Lighting point 0-15 PL=1-9
Group Group 1 - Group 10: 0-255 G=0-9
Dimensions
Size: basic module
To Next Page
Loading...
