Leica LS10 - Page 66

First Backsight Screen (Station1)
Backsight/Foresight: The selected
levelling method. The current view-
ing direction is highlighted in red.
Stat.ID: ID of the current station.
PtID: ID of the start point.
Rem/Free Code: If desired, you can
enter an additional remark to be
stored with the measurement.
Height: Height of the start point.
☞
To take a measurement, aim at the staff and press the trigger key. If
the trigger key is set to Dist or AF+Dist (only LS15), press Rec (F2
softkey) to store the measurement and switch to the next measure-
ment screen.
First Foresight Screen (Station1)
Total Dist: Total length of the line.
Distance: Measured distance
between station and levelling staff.
Dist.Balance: Difference in dis-
tance between the sum of all back-
sights (sum B) and the sum of all
foresights (sum F) on the current
station.
Second Foresight Screen (Station1)
dH Station: Height difference on
the current station.
Second Backsight Screen (Station1)
Total Dist: Total length of the line.
Distance: Measured distance
between station and levelling staff.
66 Programs