Leica LS10 - Importing Data

PtID East North Height Code Info1-8
POINT023 -6.2819 -179.8903 -0.3782 MAIN_ROAD
13.3 Importing Data
Data can be imported to the internal memory of the instrument via a USB
memory stick.
When importing data, the instrument automatically stores the le in a direct-
ory folder based on the le extension. The following data formats can be
imported:
Data Type File extension Recognised as
GSI .gsi Fixpoints
HeXML .xml Fixpoints
ASCII any ASCII le extension
e.g. .txt
Fixpoints
Format .frt Format le
Codelist .cls Codelist le
Backup .db Backup of xpoints,
measurements and
conguration
1.
Select Transfer from the Main Menu.
2.
Select
Import.
•
Importing a backup folder will overwrite the existing conguration le and
code lists on the instrument, and all existing formats and jobs will be
deleted.
•
A backup can only be imported if the instrument database structure was
not changed by a rmware update. If the instrument rmware was
updated, it can happen that a backup created before the update cannot
be imported. In this case, downgrade the rmware to the previous used
version, save the data in the way required and then reload the new rm-
ware.
A ’+’, ’-’, ’.’ or alphanumerical characters should not be used as delimiter val-
ues in ASCII les. These characters can also be part of the point ID or coordin-
ate values and if so, will generate errors where they occur in the ASCII le.
Description
Importable data
formats
Access
☞
☞
Data Management 91