Leica LS10 - Tools; Adjust

12 Tools
12.1 Adjust
The Check & Adjust Menu contains tools to be used for adjusting the line of
sight, for the alignment of the camera crosshairs and for calibrating the com-
pass of the instrument. Using these tools helps to maintain the measuring
accuracy of the instrument.
1.
Select Tools from the Main Menu.
2.
Select Adjust from the Tools Menu.
3. Select an Adjustment option from the Check & Adjust screen.
In the Check & Adjust screen, there are several adjustment options.
Menu selec-
tion
Description
F1 Line Of
Sight
To check and adjust the line-of-sight error. Refer to 14.3
Adjusting Line of Sight Error.
F2 Camera
Crosshair
Only for LS15:
To align the camera crosshairs (vertically arranged indicat-
ors) to the staff. Refer to 14.5 Aligning the Camera
Crosshairs.
F3 Digital
Compass
Only for LS15:
To calibrate the digital compass. Refer to 14.6 Calibrating
the Digital Compass.
F4 Level
Bubble
To adjust the digital bubble of the instrument. Refer to 14.8
Adjusting the Digital Bubble.
12.2 System Information
The Info screen displays information on the instrument, system and rmware.
☞
When you contact the support team, please, provide any instrument-
related information, such as the instrument type, the serial and
equipment number and the rmware version.
1.
Select
Tools from the Main Menu.
2.
Select Info from the Tools Menu.
Page 1/4 (System)
This screen displays information on the instrument and operating system.
Description
Access
Adjustment options
Description
Access
Info
Tools 81