Leica LS10 - Instrument Protection with PIN

example measured points, or codes within a job, and the memory space occu-
pied.
☞
Before pressing Format, to format the internal
memory, ensure that all important data is rst
transferred to a computer. Jobs, formats, codel-
ists, conguration les, uploaded languages and
rmware are deleted by formatting.
☞
Despite an automatic defragmentation, the
memory gets fragmented after a while. Please
format the internal memory periodically to main-
tain the instrument performance.
Page 4/4 (Dates)
Field Description
Maint.-End
Date
Displays the end date of the maintenance agreement for the
instrument rmware.
mySec.Rene
wal Date
The date when the instrument must be connected to mySe-
curity in order to renew the security functionality.
Next Service
Date
Displays the date of the next required service check. The
eld can be invisible if turned off by the service reminder.
12.3 Licence Keys
To fully activate rmware contracts, it may be necessary to load a valid licence
key on the instrument. To load a licence key, carry out the procedure
described in the following paragraph.
1. Copy the licence key into the system directory (e.g. D:\system\) on
the USB memory stick.
2. Connect the USB memory stick to the USB interface within the bat-
tery compartment.
3.
Select Tools from the Main Menu.
4.
Select Licence from the Tools Menu.
5. An information message is displayed. To conrm, press Cont. The
licence key is loaded automatically to the instrument.
12.4 Instrument Protection with PIN
The instrument can be protected by a Personal Identication Number. If PIN
protection is activated,the instrument will always prompt for a PIN entry
before starting up. If a wrong PIN has been entered ve times, a Personal
UnblocKing (PUK) code is required.
1.
Select
Tools from the Main Menu.
2.
Select PIN from the Tools Menu.
3. Activate PIN protection by setting Use PIN: On.
Description
Loading a licence key
Description
Activate PIN step-by-
step
Tools 83