Check Screen
Last Point: Point ID of the last
measured point.
Height LastPt: Height of the last
measured point.
Fix Point: Point ID of the selected
xpoint.
Height Fix Pt: Height of the selec-
ted xpoint.
Difference: Height difference
between measured point and x-
point.
To select a xpoint from the available list of xpoints, press the softkey List.
At the end of a line when all measurements to the last station are done, you
can compare the height of the last point in the line with a known xpoint and
calculate the misclosure. Press the softkey Close to start the calculation of
the line end.
Line Info Screen
Line ID: Line ID
No. Station: Number of stations
Total dH: Total difference in height
Total Dist: Accumulated distance
measurements
Dist Balance: Difference in dis-
tance between the sum of all back-
sights (sum B) and the sum of all
foresights (sum F) on the current
station
Closure Screen
Last Point: Point ID of the last
measured point
Height LastPt: Height of the last
measured point
Fix Point: Point ID of the selected
xpoint
Height Fix Pt: Height of the selec-
ted xpoint
Difference: Height difference
between measured point and x-
point
To select a xpoint from the available list of xpoints, press the softkey List.
To store the data and return to the Main Menu, press the softkey Cont.
Closing a line
68 Programs
To Next Page
