Figure87.Lightpathdiagnosticspanel
NoteanyLEDsthatarelit,andthenreinstallthelightpathdiagnosticspanelintheserver.
•Remindbutton:Pressthisbuttontoplacethesystem-errorLED/checklogLEDonthefront
informationpanelintoRemindmode.Byplacingthesystem-errorLEDindicatorinRemindmode,
youacknowledgethatyouareawareofthelastfailurebutwillnottakeimmediateactiontocorrect
theproblem.InRemindmode,thesystem-errorLEDflashesevery2secondsuntiloneofthe
followingconditionsoccurs:
–Allknownerrorsarecorrected.
–Theserverisrestarted.
–Anewerroroccurs,causingthesystem-errorLEDtobelitagain.
•Resetbutton:Pressthisbuttontoresettheserverandrunthepower-onself-test(POST).Youmight
havetouseapenortheendofastraightenedpapercliptopressthebutton.TheResetbuttonisin
thelower-rightcornerofthelightpathdiagnosticspanel.
Thesystemservicelabelinsidetheservercoverprovidesanoverviewofinternalcomponentsthat
correspondtotheLEDsonthelightpathdiagnosticspanel.Thisinformationandtheinformationin
“LightpathdiagnosticsLEDs”onpage124
canoftenprovideenoughinformationtodiagnosetheerror.
3.RemovetheservercoverandlookinsidetheserverforlitLEDs.Certaincomponentsinsidetheserver
haveLEDsthatarelittoindicatethelocationofaproblem.
Note:YoudonothavetoremovetheservercovertoviewtheLEDsonharddiskdrivesandpower
supplies.
ThefollowingillustrationshowstheLEDsonthesystemboard.
Chapter4.Troubleshooting123