Lenovo System x3550 M4 - Removing the Front Usb Connector Assembly

Figure196.T8T orxscrewdriver
00000000000000
00000000000000
00000000000000
00000000000000
00000000000000
00000000000000
00000000000000
00000000000000
Figure197.Bezelscrewsinstallation
Step6.Reinstalltheharddiskdrivesanddrivebayfillerpanelsintothedrivebays(see“Replacing
hot-swapharddiskdrives”onpage199or“Replacingsimple-swapharddiskdrives”onpage202).
Step7.Installthecover(see“Replacingthecover”onpage190).
Step8.Reconnectthepowercordsandanycablesthatyouremoved.
Step9.Slidetheserverintotherack.
Step10.Turnontheperipheraldevicesandtheserver.
RemovingthefrontUSBconnectorassembly
UsethisinformationtoremovethefrontUSBconnectorassembly.
ToremovethefrontUSBconnectorassembly,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage31.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Removetheharddiskdrivesandfillerpanelsfromtheharddiskdrivebays(see“Removing
hot-swapharddiskdrives”onpage198or“Removingsimple-swapharddiskdrives”onpage201).
Step4.Removethebezel(see“Removingthebezel”onpage273).
Step5.RemovetheUSBcagescrewfromthechassis.
276Systemx3550M4InstallationandServiceGuide