Lenovo System x3550 M4 - Removing the Serveraid Adapter Memory Module

Figure156.ServeRAIDM5110adaptercablerouting
Step10.Reconnectthepowercordsandanycablesthatyouremoved.
Step11.ReplacePCIriser-cardassembly1ifyouhaveremoveditearlier(see“ReplacingaPCIriser-card
assembly”onpage221).
Step12.Replacethecover(see“Replacingthecover”onpage190).
Step13.Turnontheperipheraldevicesandtheserver.
Note:Whenyourestarttheserver,youarepromptedtoimporttheexistingRAIDconfigurationtothe
newServeRAIDadapter.
RemovingtheServeRAIDadaptermemorymodule
UsethisinformationtoremovetheServeRAIDadaptermemorymodule.
ToremovetheServeRAIDadaptermemorymodule,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage31.
Step2.Turnofftheserverandperipheraldevicesanddisconnectallpowercords.
Step3.Removethecover(see“Removingthecover”onpage189).
Step4.RemovetheServeRAIDSAS/SATAcontroller(see“RemovingaServeRAIDSAS/SATAcontroller”
onpage230
).
Step5.GraspthememorymoduleandlifttoremoveitfromtheconnectorontheServeRAIDadapter.
236Systemx3550M4InstallationandServiceGuide