Figure190.Systembatteryinstallation
a.Tiltthebatterysothatyoucaninsertitintothesocketonthesideoppositethebatteryclip.
Figure191.Systembatteryinstallation
b.Pressthebatterydownintothesocketuntilitclicksintoplace.Makesurethatthebatteryclip
holdsthebatterysecurely.
c.Ifyouremovedarubbercoverfromthebatteryholder,useyourfingerstoinstallthebattery
coverontopofthebatteryconnector.
Step7.ReinstallthePCIriser-cardassembly2(see“ReplacingaPCIriser-cardassembly”onpage221),if
necessary.
Step8.Installthecover(see“Replacingthecover”onpage190).
Step9.Slidetheserverintotherack.
Step10.Reconnecttheexternalcables;then,reconnectthepowercordsandturnontheperipheraldevices
andtheserver.
Step11.StarttheSetuputilityandresettheconfiguration.
•Setthesystemdateandtime.
•Setthepower-onpassword.
•Reconfiguretheserver.
See“UsingtheSetuputility”onpage97
fordetails.
Removingthebezel
Usethisinformationtoremovethebezel.
Chapter6.Removingandreplacingcomponents273