Figure145.PCIriser-cardbracketinstallation
Step5.Ifyouneedtoinstallanadapter(see“Replacinganadapter”onpage226).
Step6.Reconnectthecablesfortheadapter.
Step7.ReplacethePCIrisercardassembly(see“ReplacingaPCIriser-cardassembly”onpage221).
Step8.Replacethecover(see“Replacingthecover”onpage190).
Step9.Slidetheserverintotherack.
Step10.Reconnectthepowercordsandanycablesthatyouremoved.
Step11.Turnontheperipheraldevicesandtheserver.
Removinganadapter
Usethisinformationtoremoveanadapter.
Toremoveanadapter,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage31.
Step2.Turnofftheserverandperipheraldevicesanddisconnectallpowercords;then,removethe
cover(see“Removingthecover”onpage189
).
Step3.Disconnectanycablesfromtheadapter.ForPCIriser-cardassembly2,pushthelatchtoeasily
releasethenetworkcable,asshowninthefollowingillustration.
Chapter6.Removingandreplacingcomponents225