Figure163.Screwsengagement
Step10.Fastenthetwocaptivescrewsonthenetworkadapter.
Step11.ReinstallthePCIriser-cardassemblyinPCIriserconnector2ifyouhaveremoveditpreviously(see
“ReplacingaPCIriser-cardassembly”onpage221).
Step12.Replacethecover(see“Replacingthecover”onpage190).
Step13.Slidetheserverintotherack.
Step14.Reconnectthepowercordsandanycablesthatyouremoved.
Step15.Turnontheperipheraldevicesandtheserver.
Removingahot-swapfan
Usethisinformationtoremoveahot-swapfan.
Attention:Toensureproperserveroperation,replaceafailedhot-swapfanwithin30seconds.
Toremoveahot-swap-fan,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage31.
Step2.Removethecover(see“Removingthecover”onpage189).
Step3.Pressthehandlewhilegraspingtheorangefantabsonbothendsoftheexistingfanandpullingit
upoutoftheserver.
Chapter6.Removingandreplacingcomponents243