Lenovo System x3550 M4 - Page 79

•Port0ontheEmulexDualPort10GbESFP+EmbeddedVFAIIIcanbeconfiguredassharedsystem
management.
•Whentheserverisinstandbymode,bothportsontheEmulexDualPort10GbESFP+EmbeddedVFA
IIIfunctionat100MconnectionspeedwithWakeonLANfeature.
TheEmulexDualPort10GbESFP+EmbeddedVFAIIIisautomaticallydisabledifoneofthefollowing
errorsoccurs:
•AnerrorlogindicatesatemperaturewarningfortheEthernetadapter.
•Allpowersuppliesareremovedortheserverisdisconnectedfromthepowersource.
Toinstallthedual-portnetworkadapter,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage31.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Removethecover(see“Removingthecover”onpage34).
Step4.RemovethePCIriser-cardassembly(ifinstalled)fromPCIriserconnector2(see“RemovingaPCI
riser-cardassembly”onpage220
).
Step5.Removetheadapterfillerpanelontherearofthechassis(ifithasnotbeenremovedalready).
Figure50.Adapterfillerpanelremoval
Step6.Touchthestatic-protectivepackagethatcontainsthenewadaptertoanyunpaintedmetalsurface
ontheserver.Then,removetheadapterfromthepackage.
Step7.Aligntheadaptersothattheportconnectorsontheadapterlineupwiththepinandthumbscrew
onthechassis;then,aligntheconnectoroftheadapterwiththeadapterconnectoronthesystem
board.
Chapter2.Installingoptionaldevices65