Leuze BPS 348i - Status Query of Position; Speed Measurement; Distance Measurement to the Bar Code Tape

To Next Page

To Previous Page

Functions

Leuze electronic GmbH + Co. KG BPS 348i 30

4.6 Status query of position / speed measurement

Module6 (see chapter 8.4.8 "Module6–Status and control") and module16 (see chapter 8.4.18 "Mod-

ule16–Speed status") in the PROFINET configuration signal status information of the position/speed

measurement.

The following status information can be transmitted to the PROFINET master:

• Status information for position measurement: Input data 0.0…1.7 (see chapter 8.4.8 "Module6–Sta-

tus and control")

• Status information for speed measurement: Input data 0.0…1.5 (see chapter 8.4.18 "Module16–

Speed status")

4.7 Distance measurement to the barcode tape

Within the reading field, the BPS can output the current distance from the read head to the BCB. The dis-

tance from the position label closest to the reference point is output (see chapter 8.4.20 "Module21–dis-

tance to the barcode tape (BCB)").

Output of the distance measurement value:

• In the webConfig tool via the ALIGNMENT function (Quality menu), which is only available in the Ser-

vice operating mode (see chapter 9.3.3 "ALIGNMENT function")

• Via the host interface (input data)