LevelOne GNS-4001 - 3. Server Configuration; 3.1 Server Information and Settings

15
3. Server Configuration
This chapter describes how to name the server, specify the server date and time, upgrade the OS
firmware, shut down the system and use UPS with the NAS server.
3.1 Server Information and Settings
Click Server from the administration homepage. You will see the Information page describing the
summary information of the NAS server.
The Information page is divided into two sections. The General Settings section shows the
parameters which can be modified on the Server→General page.
Server Name
Name of the NAS server. A NAS server has one unique name,
applicable to all network protocols.
Server Comment
The text which is shown in the comment field when browsing network
computers in Windows Network Neighborhood
Date/Time
Server date and time in 24-hour format
Time Zone
The time zone setting of the server relative to the Greenwich standard
time
Configure from LCD
Indicates whether users can configure the server from the LCD console
System LCD Banner
Indicates the banner text which is displayed on the LCD console when
it receives no user input or event messages for a period of time
UPS Support
Indicates whether the UPS support is enabled or not
Auto Power Restoration
If enabled, the server will power on automatically when the power
restores after abnormal shutdown
System folder resides in
Display the volume name of which the system folder is located
The System Information section shows the hardware and firmware status of the server.
Firmware Version
The version number of the OS firmware
Processor Type
The CPU operating frequency
Memory Capacity
The total size of the main memory
No. of HDD/CD/tape
Display the number of HDD/CD/tape installed in the system
LAN1/2/3 Ethernet Address
The Ethernet MAC addresses of the network controller chips and their types
PCI-E Slot
Display the type of the add-on adaptor installed in the system