LevelOne GNS-4001 - 4.2 TCP;IP Settings

21
NTP Time Server IP Address
The IP address of the NTP (Network Time Protocol) server, which
is used to synchronize system time automatically over the net.
The system time will be synchronized with the NTP server every
24 hours.
SMTP Server Address
IP address or server name of the SMTP (Simple Mail Transfer
Protocol) server used in sending and receiving e-mail.
HTTP Proxy Server IP
Address
IP address of the HTTP proxy server. Next to the IP address is the port
number.
4.2 TCP/IP Settings
TCP/IP handles network communications between network nodes that are connected to the network.
It is important to setting up correct TCP/IP setting that for NAS server to function properly.
Network Teaming Mode
The NAS server provides two on-board 10/100/1000 or Gigabit Ethernet ports (LAN1 & LAN2). You
can configure the Ethernet ports using the following operating modes:
Stand Alone: Each LAN1 & LAN2 are configured with a unique IP address, which are independent to
each other.
Fault Tolerance: Uses LAN2 to take over for the LAN1 if LAN1 is fail to connect to the network which
designed to ensure server availability to the network.
Load Balancing: Offers increased network bandwidth by allowing transmission to multiple