Note:
Antivirus requires the system folder to operate.
Please go to the Server → Maintenance page and specify the
volume where the system folder resides.
Note:
For the first-time operation, please go to the Virus Scan→
Update page to obtain the most updated virus pattern file.
Otherwise, the antivirus function cannot work.
Enabling Real-time Scanning
The real-time scanning function provides antivirus protection while users are reading or writing files to
the NAS server.
1. Click the Enable Real-time scan checkbox to enable real-time scanning.
2. Select scan direction. Incoming files are those that are being stored in NAS server whereas
outgoing files are copied or moved from NAS server to other location.
3. Click Apply to save the settings.
Configuring Manual Scanning
The manual and scheduled scanning function can scan any folders for infected files. The scan results
will be listed as a scan task summary on the Information page.
1. Go to Virus Scan→ Setting page to configure the scan settings required. See “Configuring Scan
Settings” on Section 11-3.
To Next Page
Loading...
