Lexmark M3250 Service Manual

Error code Description Action
121.09 Fuser did not reach the required temperature for
motors.
Note: Error is not applicable to standby mode.
See
“Fuser low temperature error service
check” on page 112.
121.10 Fuser did not reach the required temperature
(during start of EWC/line voltage detection).
121.11 Fuser reached the required temperature (during
final EWC/line voltage detection) too late.
121.12 Fuser did not reach the required temperature
(during final EWC/line voltage detection).
121.13 Fuser reached the required temperature (during
final EWC/line voltage detection) too fast.
See
“Fuser high temperature error service
check” on page 111.
121.19 Fuser high power trace reached the required
temperature (during final EWC/line voltage
detection) too fast.
121.20 Fuser high power trace heating rate went over the
limit.
121.21
Fuser low power trace heating rate (from 165
o
C to
180
o
C) went over the limit.
121.22 Open fuser relay was detected. See
“Fuser error service check” on page 110.
121.28 Fuser did not reach the required temperature
(during EP warm‑up).
See
“Fuser low temperature error service
check” on page 112.
121.32 Fuser did not reach the required temperature (on
100% power).
121.33 Fuser did not reach the required temperature
(while page is in the fuser).
121.34 Fuser did not reach the required temperature
(during steady state control).
121.36 Open fuser relay was detected with very cold or
unknown ambient temperature.
121.41 Fuser mechanism failed to detect the expected
cam sensor transition.
121.50 Fuser went over the required temperature (during
global overtemp check).
See
“Fuser high temperature error service
check” on page 111.
121.52 Main thermistor temperature is out of range.
121.53 Main thermistor temperature change rate is out of
range.
121.71 Open fuser main heater thermistor was detected. See
“Fuser error service check” on page 110.
4600-830, -835, -895
Diagnostics and troubleshooting
109

Lexmark M3250 Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	50 ppm
Printing colors	Black
Maximum duty cycle	175000 pages per month
Recommended duty cycle	2000 - 20000 pages per month
Number of print cartridges	1
Page description languages	-
Paper input type	Paper tray
Total input capacity	650 sheets
Total output capacity	250 sheets
Maximum input capacity	2300 sheets
Maximum number of input trays	4
Multi-Purpose tray input capacity	100 sheets
Envelopes sizes	7 3/4, 9, 10, DL
Paper tray media types	Card stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service
USB connector	USB Type-A / USB Type-B
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Processor cores	2
Processor frequency	1000 MHz
Sound pressure level (printing)	55 dB
Operating altitude	0 - 2896 m
Operating temperature (T-T)	16 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Sustainability certificates	EPEAT Silver, ENERGY STAR
Power consumption (printing)	- W
Control type	Touch
Product color	Black, White
Display diagonal	4.3 \
Market positioning	Business

Weight and Dimensions

Depth	373.4 mm
Width	398.8 mm
Height	302.3 mm